Starting Operation

Once the rechargeable battery (8) has been inserted, the power tool is ready for operation.

• Firmly position the outlet (1) or the rubber workpiece protector (2) on the workpiece until the discharge lock-off (15) is pressed down completely.
  The worklight (5) switches on.
• Afterwards, briefly press the trigger (6) and release it again.
  This discharges a nail.
• For another driving procedure, completely lift the power tool from the workpiece and position it firmly at the next required location.
  Alternatively, you can press and hold the discharge lock-off (15) and press the trigger (6) to discharge another nail.