Fitting the abrasive tools

Pull the plug out of the socket before carrying out any work on the power tool.

Clean the grinding spindle (5) and all parts to be mounted.

Lock the grinding spindle with the spindle lock button (1) before clamping and releasing the abrasive tools.

Do not press the spindle lock button while the grinding spindle is moving. The power tool may become damaged if you do this.

See the graphics page for fitting instructions.

Backing pad with hook-and-loop fastening

Firmly screw the backing pad with hook-and-loop fastening (7) onto the grinding spindle (5).

Press the polishing sponge pad with hook-and-loop fastening (8) or the polishing wool pad with hook-and-loop fastening (9) firmly against the underside of the backing pad with hook-and-loop fastening (7).