Operation with Non-Rechargeable Batteries
- To switch from a lithium-ion battery pack (12) to non-rechargeable batteries, remove the lithium-ion battery pack (12).
It is recommended that you use alkaline manganese batteries to operate the measuring tool.
- Insert the non-rechargeable batteries.
- Always replace all the non-rechargeable batteries at the same time. Only use non-rechargeable batteries from the same manufacturer and which have the same capacity.
- When inserting the batteries, ensure that the polarity is correct according to the illustration on the inside of the battery compartment.
- Insert the battery compartment cover (14) and let it click into place.
- Press the locking mechanism (15) to open the battery compartment cover (14) and remove the battery compartment cover.
- Take the batteries out of the measuring tool when you are not using it for a prolonged period of time. The batteries can corrode during prolonged storage in the measuring tool.