Settings Menu

You can find the following settings in the  menu:

  • Audio signals
  • Measurement unit
  • Manual
  • Tool information
  • Factory reset
  1. Press the  button to open the Functions menu.
  2. Use the  button to select the setting  and confirm with the  button.
  3. Use the  button to select the required setting and confirm with the  button.

The sound is switched on by default.

  1. Select the setting  in the  menu.
  2. Press the  button to change the selection.
  3. To confirm the selection, press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

The default unit of measurement is “m” (metres). Different units of measurement are available. Set the appropriate unit of measurement for your purposes.

  1. Select the setting  in the  menu.
  2. Press the  button to change the selection.
  3. To confirm the selection, press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

  1. Select the setting  in the  menu.
  2. A QR code will appear on the display. Scanning it will take you to the online operating instructions.

Here you will find information about the measuring tool, such as the serial number and software version.

  1. Select the setting  in the  menu.

This function is used to reset the measuring tool to factory settings.

  1. Select the setting  in the  menu.
  2. Press the  button to change the selection.
  3. To reset the measuring tool, select and confirm with the  button.