Switching On and Off

There are 2 ways to switch on the power tool.

Switching on by pressing the spindle

  1. To switch on the tool, exert pressure on the spindle and maintain this pressure to continue using it.
  2. The worklight lights up for 10 seconds.
  3. To switch off the tool, stop exerting pressure on the spindle.

Switching on using the On/Off switch

  1. To switch on the tool, press the On/Off switch (5) and hold the On/Off switch (5) down.
  2. The worklight lights up for 10 seconds.
  3. To switch off the tool, release the On/Off switch (5).