Start-Up

To start the power tool, push the unlocking lever (7) forwards and then push the on/off switch (8) up.

To switch off the power tool, release the on/off switch (8).

The user interface (3) is used to preselect the speed and to indicate the status of the power tool.

Temperature indicator (17)

Meaning/cause

Solution

Yellow

Critical temperature has been reached (electronics, battery)

Run the power tool at no load and allow it to cool down

Red

Power tool is overheated and will switch off

Leave the power tool to cool down

Battery charge indicator (user interface) (18)

Meaning/cause

Solution

Yellow

Battery almost empty

Replace or charge battery soon

Red

Battery empty

Replace or charge battery

Power tool status indicator (19)

Meaning/cause

Solution

Green

Status OK

–

Yellow

Critical temperature has been reached, or rechargeable battery is almost empty, or overload has been detected

Run the power tool at no load and allow it to cool down or reduce the load so that the power tool works properly

Illuminated red

Power tool has overheated or rechargeable battery is empty

Allow the power tool to cool down, or replace or charge the battery

Flashing red

KickBack Control, restart protection or Drop Control has been triggered

Turn the power tool off and on again

Overload indicator (user interface) (21)

Meaning/cause

Solution

Yellow

Overload detected

Reduce the load so that the power tool works properly